/* ** ** Swift/XRT hardness ratio for PKS B0906+015. ** Hardness ratio for this file has been calculated by splitting the data at 2.0 keV. ** ** Data taken from the automatic processing at http://www.swift.psu.edu/monitoring/ ** ** When using these data and results in publications, please reference M.C. Stroh & A.D. Falcone 2013, ApJS, 207, 28; arXiv: 1305.4949. ** ** Key: ** ** BinCenter - Center of time bin (MJD). ** BinHW - One-half of the full time bin size (days). ** FracExp - Conversion factor between bin size and observing time. ** Ratio - Source hardness ratio (2.0 - 10.0 keV)/(0.3 - 2.0 keV). ** This is also Rate2/Rate1 from the following columns. ** RatioError - 1 sigma error in the hardness ratio. ** Mode - 0 if in Windowed Timing (WT). ** 1 if in Photon Counting (PC). ** Rate1 - The background subtracted, PSF corrected and pile-up corrected source count rate (cts/s) in the 0.3 - 2.0 keV band. ** RateError1 - 1 sigma error in source count rate (cts/s) in the 0.3 - 2.0 keV band. ** NetRate1 - Background subtracted count rate (cts/s) in the 0.3 - 2.0 keV band. ** NetError1 - Error in the background subtracted count rate (cts/s) in the 0.3 - 2.0 keV band. ** Rate2 - The background subtracted, PSF corrected and pile-up corrected source count rate (cts/s) in the 2.0 - 10.0 keV band. ** RateError2 - 1 sigma error in source count rate (cts/s) in the 2.0 - 10.0 keV band. ** NetRate2 - Background subtracted count rate (cts/s) in the 2.0 - 10.0 keV band. ** NetError2 - Error in the background subtracted count rate (cts/s) in the 2.0 - 10.0 keV band. ** ** ** Upper limits have an error listed as -1.00000. ** */ BinCenter BinHW Ratio RatioError FracExp Mode Rate1 RateError1 NetRate1 NetError1 Rate1 RateError2 NetRate2 NetError2 55265.378230 0.203709 0.34690 0.09011 0.06410 1 0.03946 0.00516 0.02606 0.00340 0.01369 0.00307 0.00890 0.00199 55265.745938 0.103361 0.51710 0.15377 0.10234 1 0.03745 0.00651 0.02358 0.00360 0.01937 0.00467 0.01208 0.00258