/* ** ** Swift/XRT hardness ratio for PKS 1730-130. ** Hardness ratio for this file has been calculated by splitting the data at 2.0 keV. ** ** Data taken from the automatic processing at http://www.swift.psu.edu/monitoring/ ** ** When using these data and results in publications, please reference M.C. Stroh & A.D. Falcone 2013, ApJS, 207, 28; arXiv: 1305.4949. ** ** Key: ** ** BinCenter - Center of time bin (MJD). ** BinHW - One-half of the full time bin size (days). ** FracExp - Conversion factor between bin size and observing time. ** Ratio - Source hardness ratio (2.0 - 10.0 keV)/(0.3 - 2.0 keV). ** This is also Rate2/Rate1 from the following columns. ** RatioError - 1 sigma error in the hardness ratio. ** Mode - 0 if in Windowed Timing (WT). ** 1 if in Photon Counting (PC). ** Rate1 - The background subtracted, PSF corrected and pile-up corrected source count rate (cts/s) in the 0.3 - 2.0 keV band. ** RateError1 - 1 sigma error in source count rate (cts/s) in the 0.3 - 2.0 keV band. ** NetRate1 - Background subtracted count rate (cts/s) in the 0.3 - 2.0 keV band. ** NetError1 - Error in the background subtracted count rate (cts/s) in the 0.3 - 2.0 keV band. ** Rate2 - The background subtracted, PSF corrected and pile-up corrected source count rate (cts/s) in the 2.0 - 10.0 keV band. ** RateError2 - 1 sigma error in source count rate (cts/s) in the 2.0 - 10.0 keV band. ** NetRate2 - Background subtracted count rate (cts/s) in the 2.0 - 10.0 keV band. ** NetError2 - Error in the background subtracted count rate (cts/s) in the 2.0 - 10.0 keV band. ** ** ** Upper limits have an error listed as -1.00000. ** */ BinCenter BinHW Ratio RatioError FracExp Mode Rate1 RateError1 NetRate1 NetError1 Rate1 RateError2 NetRate2 NetError2 56774.013536 0.011344 1.44190 0.35426 0.86845 1 0.02078 0.00393 0.01664 0.00314 0.02997 0.00470 0.02406 0.00378 56774.080845 0.010691 0.85301 0.23280 0.98628 1 0.02226 0.00413 0.01613 0.00300 0.01899 0.00380 0.01378 0.00276